Home > Hard Drive > Computer Wont Turn On With Hard Drive Plugged In

Computer Wont Turn On With Hard Drive Plugged In


Was this answer helpful? A very easy thing to do. current community chat Super User Meta Super User your communities Sign up or log in to customize your list. Fortunately, most optical drives, such as DVD burners and CD readers, still use the old PATA specification. weblink

It's actually quite easy, and certainly worthwhile doing. Main advantage is you don't have to open the PC. Either using a partition (well MS and others call them drive) recovery facility - as in the ‘recovery disk you are invited to make under windows. I didn't put quite enough thought into my answer, obviously...I was assuming (Perhaps incorrectly) that the drives were both PATA and of the same generation... https://www.neowin.net/forum/topic/645224-pc-wont-boot-if-hard-drive-is-plugged-in/

Computer Wont Turn On With Hard Drive Plugged In

Is there any truth to this?Please advise and thanks. -Randy- Flag Permalink This was helpful (0) Collapse - Mixing hard drive speeds by Keldawwg / September 16, 2005 2:14 AM PDT I got recovery discs and ran them on the new drives that installed a clean OS. so changed from usb enclosure to a usb adapter which is 3.0 then again connected to another laptop still it was getting stuck while it was connected. I have a related problem when trying to swap hard drives between two computers.

  • So i opened this device manager and checked for any drives problems, i find "WPD system something" showing yellow marks and sometime it names changes to the partition letter but still
  • Search through over 5000+ Articles!
  • The BIOS boot order is "CD drive, Hard drives, Ethernet, floppy".
  • Reply Ian December 30, 2016 at 6:01 am # I don't believe what just happened!
  • If you opted for ‘Quick' format - that will have ignored the data on the drive and just written a new 'empty' set of MFT, or FAT and space allocation tables
  • I do have admin authorised account, but I can't go into the files on my external hard-disk, as it says I don't have access to them.
  • Haven't received registration validation E-mail?
  • share|improve this answer answered Jul 10 '13 at 13:36 Michael 1 add a comment| up vote 0 down vote SOLUTION: You need another HDD.
  • recover data from the SSHD - if the drive will respond to read requests - probably, but ..
  • Because the installation that exists on the drive is still protecting the folders with your data, you'll get an error message if you try open and browse the folder.

Once you have installed the drive and ensured its connected securely, I can insert it into the protective casing. i will like to summarize my problem again. http://www.terabyteunlimited.com/bootitng.htmlThe 1st drive will now be showing for you to begin the install of bootit. Installed New Hard Drive Windows Won T Boot Report Moosemunch- Apr 20, 2011 at 12:29 PM Thanks for the quick fix and easy instructions.

In short - for it to be diagnosed you need to take it to a technician with an appropriate set of equipment setup to allow the drive to be diagnosed and Hard Drive Detected In Bios But Won't Boot Of course this is presumming you already have the drive set as slave. The 4 pin power cable is polarised, so it will only connect one way; sadly, the data cable - the ribbon cable - is sometimes polarised, and sometimes not. My laptop is 3 years old, is there any way to recover my data from it ?

Second hard drive not recognized Internal second hard drive not recognized? Installed New Hard Drive And It Wont Boot I took the old 40gig HDD out and replaced it with a new 80gig HDD/master and installed same OS from same copy of discs. Log in / Username Password Verification Stay logged in Login Forgot Your Password? The exception would be if the new hard drive died; at which point on start-up the BIOS would continue to look for a bootable device, find the old drive, and try

Hard Drive Detected In Bios But Won't Boot

The Admin install id exposed to the login screen and with a good secure password. Now - if you can access the data on the drive, make life a bit simpler - create a new id using your ID and password from the original system - Computer Wont Turn On With Hard Drive Plugged In Takes about 15 seconds, and then you can pull the floppy out and reboot to the HDD. Installed A New Hard Drive Now Computer Won't Turn On Why not???...

Note - you will need ‘your data' to be backed up onto a remote location to deal with the theft catastrophe. have a peek at these guys I'm very confused/distressed, and not sure what to do next… If anyone can help please don't hesitate. And that burst would be limited to the size of the cache, which is typically 2MB and on a high end drive might be 8 MB.So, good job on catching my Reply Bilb November 29, 2016 at 7:53 pm # Hello James, Have a laptop which will not boot, (Windows 8 was installed) have taken hdd out in order to place in Windows Won't Boot With Second Hard Drive

It's 24 hours since I did that and it still doesn't work. by Keldawwg / September 22, 2005 1:26 AM PDT In reply to: In more detail... Report crobar- Feb 9, 2010 at 06:50 PM You're absolutely right, I have the same problem as the original guy, I have an old hard drive. check over here You can probably get far more detail using Google search key such as "reusing hard drives under windows " and add in your windows version at the end.

Now - to the drive you have - That the OS sees 3 partitions means that recovery of the data is much more likely. Sata To Usb Its also useful if you want to store music, video etc. You also say it changes names of partitions - names or assigned letters?

This has been a nightmare to figure out and resolve.

So - what OS? Last week the original boot drive (a Seagate SATA drive) failed after 8 years of almost continuous uptime. Will try with Treesize. Reboot And Select Proper Boot Device Browse other questions tagged hard-drive boot sata or ask your own question.

It's what I use and it saves me often. 😉 groovyPost.com Founder Reply Ian December 31, 2016 at 3:44 am # Thank you Steve, that sounds like an excellent idea. Leave enough space unallocated on the new drive for a copy of your old OS partition - or maybe 2 copies - 500GB should be enough for a Win 10 environment. So Clone Old HD Instead! this content Flag Permalink This was helpful (0) Collapse - Just a little verification by nmonic / September 16, 2005 10:50 PM PDT In reply to: Failed attempt on transfer of hard drive

However, you should make sure that you are using an admin authorized userid for that - and then, after you have sorted this matter, make sure you go back to using Basically, when i connect the drive with usb adapter or enclosure, all my partitions are shown on file explorer when i open FE. I can see my User folder, but there isn´t anything in there (only default user). Additionally under NTFS, small files do not get allocated their own blocks within the general file-space on the drive, but get held in the MFT area - (Theory is - no

Reply Pratik Bhagwat November 10, 2016 at 10:51 pm # your user account you use to login with may be damage so it has created a temporary user. A quick note about hard drives. Power on and check to see if you can see it now....if not, listen to the drive, is it spinning up, can you hear any odd noises, grinding, ticks...let me know. My second IDE channel has only the DVD drive on it.

Unfortunately, I was in a bind, no working optical drive or a USB stick I could use. This pc didn't have a slave plug-in in the gray cable, I had to pull that from my old pc which died when the mother board burned out and fried the